Material: Gray cast iron Size: 200-2500mm Package : Plywood case with anti-rust treatment
Detail: Bench center is mainly used for inspecting the radial bound, circular bound and end surface circular bound of the axial or disk parts. Its accuracy is high while it is very convenient in use.
Main technique parameters: 1),The radial circular bound of the Morse No. 2 finial 60 degrees cone surface to the Morse cone≤0.005mm. 2),The parallelism between the finial axle within the scope of 100mm and the leading track (parallel and vertical direction)≤0.006mm. 3),The max diameter of the tested part is 270mm. 4), Measuring length 300mm\500mm\1000mm\1500mm\2000mm.
Detail: Magnalium straight edge is commonly found in the applications, for instance, inspection, measurement, scribing, equipment installation, and engineering construction. Features: * Light Weight The precision straight edge of no longer than 2 meters has the average weight of 1.5kg/m, and the one of longer than 2 meters is available with the average weight of 3kg/m. A 6 meters long straight edge only weights 18 kilograms. Therefore, our product even can be conveniently used by one person. * Resistance to Deformation In general, the common type steel has the yield point of only 30kg/mm2, and the cast iron has the yield point of 38kg/mm2. Dissimilarly, magnalium has the yield point up to 110kg/mm2. For that matter, it is a kind of engineering straight edge extremely excellent in anti-bending and anti-deformation performances. * Easy to Keep This magnesium alloy straight edge can be hung or laid flat. And its straightness, parallelism will not be affected by the long-term storage. * Good Anti-rust Performance No oil coating is required during the application period. If the magnalium straight edge is not to be used for a long term, it should be gently coated with the ordinary type industrial oil, and then it can be stored.
){kind=link}